Sentence examples for liner parameters from inspiring English sources

Moreover, it was examined whether the liner parameters (RBH, SW, IL), BH immediately after surgery (iBH), and the implant placement site affected the changes in BH over time.

On liner parameters of gait analysis, there were significant improvements in speed (.17 .29m/s), cadence (55.4 77.4 steps/min), and stride length (.31 .40m).31 .40m

Table 7 The radiographic measurements of liner parameters at immediately after surgery (RBH, IL, SW) Parameter Mean (mm) SD (mm) RBH 4.48 1.51 IL 6.50 1.88 SW 10.32 2.29.

This study explores the possibility of non-liner parameter estimation through use of Volterra and Wiener theories.

Liner design parameters are chosen to achieve up to 30 dB attenuation of the broadband pressure field over the pipe length without affecting the velocity field statistics.

The effect of liner design parameters such as, duct liner length, duct outer diameter, liner thickness, resistivity, and porosity of porous material on sound attenuation has been computed by a special computer program.

Optimisation studies based on dissipation or TL maximization showed the sensitivity of the liner constituting parameters to variations in the design target range such as the center frequency, the levels of acoustic excitation and the nature of the surface impedance (locally or nonlocally reacting).

It shows that on cylinder liner, texturing with variable parameters in different velocity ranges can produce higher load carrying capacity and film thickness than that with invariable parameters.

To further explore this condition, two design parameters, the liner thickness and its buckling resistance, were examined analytically using a practical application of 152.4 mm (6 in).

It was discovered that oxide and non-oxide femoral heads differently affected the oxidation processes at the surface of the polyethylene liners, all other testing parameters being equal.

Slotted liners have several design parameters including the slot density, pattern, slot opening size and shape that must be chosen to provide optimum inflow and outflow performance in the reservoir.