Sentence examples for lime sodium from inspiring English sources

Acid hydrolysis and steam can be used to hydrolyze hemicellulose into fermentable mono- or oligosaccharides using high temperature or pressure11; and alkaline treatments (lime, sodium hydroxide, wet-oxidation, and soaking with ammonia) provide efficient delignification, resulting in solid residues of cellulose fibers and certain hemicelluloses12,13,14,15,16.

Hence, the non-reactive type fly ashes can be activated in an alkali environment, such as lime, sodium hydroxide, potassium hydroxide or a combination of sodium hydroxide and sodium silicate to further improve the reactivity to participate in the pozzolanic reactions.

This indicates that fluxes such as lime, sodium or potassium salts were not mixed sufficiently here with other glass melt constituents.

Micro-machining of silver sodium ion-exchanged lime-sodium glass was carried out using fourth harmonic generation (FHG) of Nd YAG nanosecond laser.

Chemicals used for softening include calcium hydroxide (slaked lime) and sodium carbonate (soda ash).

The aim of the present study is to explore the effect of temperature (5 °C and 25 °C) and sucrose concentration (5%10%and20% 20% wt) on thaumasite formation from lime and sodium carbonate, sulphate, silicate sugary solutions.

This study has examined the influence of five treatments on the physical and mechanical properties of concrete: treatment with lime (CH), sodium silicate (SS), polyvinyl alcohol (PVA), heat treatment (TH) and OPS saturation (SAT).

Additional chemicals used for cell disruption include acidic solutions (hydrochloric and sulfuric acid), alkaline substances (lime or sodium hydroxide) (Harun and Danquah 2011), lysine, acetone, methanol, or DMSO (Steriti et al. 2014) which are typically added to cells at high temperatures (120 160 °C).

By adding calcium oxide - also known as lime - the sodium hydroxide can be recovered for reuse.

Aridisols are too rich in lime and, often, sodium to be fertile unless they are extensively irrigated and the salts are removed.

This paper presents a study of the effect of the source of aluminum (when mixed with lime and synthetic sodium sulfate-rich effluent) on the physicochemical properties of the resultant ettringite sludge and on the propensity of the precipitate, when recycled, to form high density sludge (HDS).