Sentence examples for light are calculated from inspiring English sources

Therefore, retinal arteriolar and venular changes in diameter in response to flickering light are calculated automatically by the DVA software (after averaging the two obtained examinations for each eye) and reported as percentage in comparison with baseline diameter.

By using the numerical simulation, as depicted in Fig. 1, the co-polarized transmitted efficiency and the corresponding phase variations for both X-linear-polarized (XLP) light and Y-linear-polarized (YLP) light are calculated as functions of the geometries of the silicon bricks.

PSDs for each condition (pre, during, and after light) were calculated for contiguous 10/20/40-s (anesthetized) or 60-s (treadmill) LFP segments.

The correlated colour temperature (CCT) of this white light is calculated as 5340.21 K which lies in a cool region.

The G factor, which compensates for differences in detection efficiency for vertically and horizontally polarized light, was calculated from the fluorescence intensity ratio of vertical and horizontal emissions when the excitation polarizer is set in the horizontal position (IHV/IHH).

To investigate this feasibility, the linear absorption of light is calculated by the HSE XC functional.

The power of the frequency dependent light was calculated using a Si photodiode (Newport 818-UV-L; Newport Corporation, Irvine, CA) which outputs the frequency-dependent signal to a lock-in-amplifier.

The difference in phase angle between the onset of activity and the offset of the light was calculated based on the activity profile using the Chronobiology Kit.

Lastly, the mean density in the light was calculated using the formula: mean density = (IOD SUM /area.

The area (in pixel) of the brightness of threshold light was calculated from a minimum of 19 images per condition.

Retinal arteriolar and venular dilation in response to flicker light was calculated automatically by the DVA software.