Sentence examples for lifetime of coating from inspiring English sources

By considering the change of the surface chloride after surface treatment, two criteria are proposed to assess the lifetime of coating materials, i.e., equivalent amount of surface chloride, and equivalent instantaneous slope of surface chloride.

It provides an overview of surface preparation processes, which affect performance and lifetime of coating systems significantly.. Surfaces are prepared by various methods including uncoated surface, metal coated surface, surface painted with prefabrication primer, and painted surface.

It was shown that the top layer of PANI exhibits a lower porosity behavior with respect to Ni coating and reduces the corrosion rate of Ni/MS almost by a factor of 3500 and increases the lifetime of Ni coating.

It was found that the gradient structure significantly increased the lifetime of the coating.

Imperfect maintenance actions such as spot repair and repainting can be done to extend the lifetime of the coating.

Depletion of aluminum would be detrimental for the lifetime of the coating and consequentially for that of the structural component.

The endurance lifetime of Ni B coating was prolonged when the load was decreased.

To further enhance the efficiency of gas turbines, higher temperature capability and a longer lifetime of the coating are needed for the next generation of TBCs.

During thermal shock test at 400 °C, thermal shock lifetime of the coating systems increased with the decrease of thickness of Al layer as well as the increase in that of YSZ layer.

Cr at the surface may increase the lifetime of this coating as it is known that it decreases the critical amount of Al required to maintain a protective alumina scale.

The lifetime of drills coated with Ti Cr B N and Ti Si B N coatings as well as the productivity of the drilling process were examined.