Sentence examples for level of the composite from inspiring English sources

The reinforcement level of the composite increased with increasing MWCNT content.

Simulations of the real phenomenon that occur at the micro level of the composite have been done by mean-field homogenization technique and finite element analysis.

It was verified that the damage level of the composite plate can be simply evaluated by assessing the induced residual strains by metal-coated FBG sensors.

To prevent this type of failure, current standards and design guidelines impose strict limitations on the maximum strain level of the composite material which may be utilised in design.

However, at the highest level of the composite, long fibers localize on planes of pre-existing damage, and thus short fibers must be employed instead to achieve notch sensitivity and damage tolerance.

An investigation on the ballistic impact behaviour of tungsten blunt projectiles on Kevlar® 29 plain-woven fabrics with an epoxy matrix has been carried out for the purpose of gaining an insight in the phenomena at the level of the composite components.

The performance level of the composites with various ratios of the constituents was compared in terms of piezoelectric responses obtained from three different tests, i.e., foot stamping, vehicle loading, and cyclic wheel loading tests.

An efficient numerical scheme developed to calculate the velocity and the mass flux across the block interface between different grid levels of the composite grid, which is also applied in the heterogeneous cases.

In short, the proposed method includes the following features: (a) An efficient numerical scheme developed to calculate the velocity and the mass flux across the block interface between different grid levels of the composite grid, which is also applied in the heterogeneous cases.

Finite element analysis used to predict the noise level of the steel concrete composite bridge determined that low-frequency noise was the dominant component of the bridge-borne noise.

In particular, the gloss changes and aberration are strongly correlated with the degradation level of the polymer composites.