Sentence examples for level of feed rate from inspiring English sources
The best parametric combination to obtain the least amount of chipping volume is considered as the first level of feed rate (F1), the third level of vibration amplitude (A1) and the first level of tool diameter (TD1).
Best results were obtained with woven MTM44-1/HTS oven cured material (3750 holes) while the effect of prepreg form on tool life was evident only when operating at the higher level of feed rate.
The optimum cutting conditions for desired surface roughness and tool wear were at a high level of cutting speed, medium level of depth of cut, low level of feed rate and low-flow high-velocity (LFHV) cutting fluid flow from the selected levels.
The milling experiments are conducted on the CNC vertical milling machining centre by considering three levels of feed rate, spindle speed and axial depth of cut.
The factors comprised three levels of moisture content (MC), three levels of feed rate (FR), and three levels of rotor speed (RS).
The turning performance in terms of cutting force and cutting temperature was evaluated under three levels of cutting speed and two levels of feed rate and at a constant depth of cut.
Various compositions of maleated ethylene-propylene-rubber (EPR-g-MA) toughened polyamide 6 without and with short glass fiber, i.e. 5 20 wt.% rubber and 5 20 wt.% fiber, are prepared using an industrial twin-screw extruder at different levels of feed rate (100 250 kg/h), screw speed (200 450 rpm) and barrel temperature (230 260 °C).
For validation, hard turning tests were conducted and the cutting forces, tool-foil voltages and embedded thermocouple voltages were measured simultaneously at three levels of feed rates.
At higher feed rates, thermal loss of MWCNTs decreases as applied heat amount decreases with increase of feed rate.
To conclude, a plasma power of 30 kW with a low level of powder feed rate of 6 g/min and 0.5 m/s of scanning speed is most preferable to optimise TiO2 coating deposition on mild steels.
The studies showed that for coals having a high level of NGM, feed rate could be one of the critical parameters affecting the efficiency of separation.
