Sentence examples for level of cutting from inspiring English sources

The contour plots of the process parameters revel that the low cutting forces are associated with the lowest level of depth of cut and the highest level of cutting speed and the sensitivity analysis revealed that cutting speed is most significant factor influencing the response variables investigated.

The optimum cutting conditions for desired surface roughness and tool wear were at a high level of cutting speed, medium level of depth of cut, low level of feed rate and low-flow high-velocity (LFHV) cutting fluid flow from the selected levels.

With this adjustment, the entropy level of cutting likelihood becomes 0.56.

Next, we examined RAG cutting on hexasomes reconstituted onto Fragment 2. Here, where only the heptamer of the RSS is exposed, we find a more modest level of cutting that is reflected by a similar, moderate amount of cutting by Sal I. Finally, for reconstitutes made with Fragment 3, there is negligible RAG cutting on both the hexasome and the nucleosome.

However, because MU is a very noisy measure, and the level of cutting of MU data varied from site to site, our data are simply not enough to be conclusive.

Four wheatgrass provenances were sown in a three-factorial block design with three cutting heights at harvest (5, 10, and 15 cm above soil surface) and three levels of cutting frequency (one, two, and four cuts year−1).

The turning performance in terms of cutting force and cutting temperature was evaluated under three levels of cutting speed and two levels of feed rate and at a constant depth of cut.

This study surveys the needed energy for cutting canola stems in different levels of cutting height and moisture content.

The prediction was performed by using Neural Network Tool Box 7 of MATLAB R2015a for different levels of cutting speed, feed rate, material hardness and cutting conditions.

A design of experiments was prepared with eight experiments with two levels of cutting parameters such as spindle rotational speed, feed rate and tool nose radius.

To provide initial guidelines for applying helical milling, a screening of the current literature was performed summarizing equipment and cooling techniques used, and the levels of cutting conditions of helical milling applied for hole-making different materials.