Sentence examples for level of clay from inspiring English sources

However, achieving a high level of clay dispersion has been a key challenge in the production of polymer/clay nanocomposites.

The high level of clay in the unaltered farmland may be the result of long term irrigation with Yellow River water, which contained much suspended clay and silt.

All nanocomposites showed a good level of clay distribution and dispersion into PBAT, especially nanocomposites with high clay chemical affinity with the polymer matrix.

The highest concentration of extracted copper (50 mg/L) was obtained in the inoculated washed and sieved treatments (T1 and T2) and the least copper concentrations was measured in those treatments with high level of clay particles (T3 and T6).

The degree of the enhancement in electrospinnability by clays with proper tethering chemistry is at least the same as or greater than that obtained with three times higher loading level of clay particles without proper tethering chemistry in the nanocomposites.

While a high level of clay delamination is required in polymer nanocomposites, thermal degradation increases furthermore for highly exfoliated morphologies due to an increased exposure of the polymer matrix to silicate nanoplatelets.

High levels of clay dispersion could be achieved even at the higher clay loadings.

Very low levels of clay result in dramatic increases in crystallization kinetics relative to extruded pure polyamide.

The results from these quantitative methods indicate that nanocomposites with different spatial dispersion levels of clay in the poly styrene-co-acrylonitrile) matrix were obtained.

It extends 1,200 meters along the beach and is composed of stratigraphic deposits of overlaying levels of clay and sand formed in shallow water bodies with a certain degree of marine influence.

Mann (1990) stressed that filter substrates are more advantageous to use due to their high hydraulic conductivity, e.g. they are less likely to clog or block than are systems based on soil containing high levels of clay or silt.