Sentence examples for less output power from inspiring English sources

From the results discussed in section 4.1, it is evident that a change in the shank width, much like a change in fiber size, will scale the normalized output power from the tips according to Eq. 2. Thus, less power can be coupled into a narrower optrode shank and less output power will be measured consequently.

We show that under suitable persistent of excitation like conditions the model identified is the one that exhibits less output error "power".

After soaking in SBF, it was observed that the specimen produced with PVA binder or less laser output power possessed a better apatite induction ability.

Analysis of the pressure drops showed that for these miniature PEMFCs, the energy losses due to the pressure drops can be neglected because they are far less than the cell output power.

The optical power contrast between bit code 1 and 0 at output port is more than 37 dB, and measured imbalance of output power is less than 1.5 dB for bit code 1.

As expected, the Markov MM-LINC outperforms the standard mode multiplexing method because its signals have a better PAPR, leading to identical output power but less adjacent channel interference.

The measured results are in close agreement with simulated results with a less than 3% deviation in maximum output power.

Excellent TEM00-mode laser beam profile at M2 ≤ 1.05 and very good output power stability of less than 1.6% were achieved.

The stroke and operating frequency are predicted with less than 2% error whereas the output power discrepancy is of about 30%.

When the wind power fluctuation range is less than 0.2, the actual fluctuating output power is still within security limits and the optimal result of the robust optimization model is similar to the result of the deterministic model.

Note that if there were only one flood light as source, and optrodes were selected for transmission using a spatial light modulator, the efficiency would be the same except that the total output power would be less due to parts of the input beam being blocked.