Your English writing platform
Discover LudwigSuggestions(1)
Exact(2)
③ Due to Hongxinglong Administration takes irrigation mainly in well irrigation, overexploitation of groundwater leads to the decline of groundwater level, less of surface water resources development and utilization and so on.
In this regime, the IPFM design shows 8 12% less of surface than conventional design when the flow rate is less than 10 CFM; yet the thermal performance is slightly inferior to the conventional design when the flowrate is raised towards 25 CFM.
Similar(58)
Little, however, is known about the electrochemistry and even less on surface chemistry of these materials in alkaline media simulating concrete pore solutions.
The calendered electrodes showed relatively less amount of surface gas adsorption, and the adsorption isotherm curves were falling below the not-pressed electrode as shown in Fig. 3c.
This study investigates that reflective facades reduce thermal movement loading to sealant joints due to less fluctuations of surface temperature, and therefore lower fatigue damage of sealant joints.
(b) It was found very less amount of surface defects (few cracks at the corner zone) in the extruded product and supports improvement of flexural strength and tribological properties.
The mathematical model is followed by the simulation model and the resultant parametric values through well designed sets of precision machining experiments using proper optimization technique to predict optimum machining combination that result in less distortion of surface quality.
All the results consistently show that less amount of surface layer is formed by electrolyte decomposition on LiCoO2 electrode surface in DPE-added electrolyte than the DPE-free one, leading to reduction of the electrode resistance and polarization.
The uniform coating had a less degree of surface failure during 1000 cycles of the impact-sliding tests at 80 N/200 N (approximate 0.8 1.2 GPa contact stress) impact-sliding forces.
Although Δ trpE cells did transiently attach and form small microcolonies on glass, they failed to grow and to form thick cell clusters on the flow cell surface, resulting in 3-fold less of the surface being covered with biofilm compared with the WT strain.
For the purpose of the present discussion, the difference between groundwater and hydrothermal solutions is that groundwater retains many of its original chemical characteristics and remains within one kilometre or less of the surface.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com