Sentence examples for lengths of heating from inspiring English sources

The lengths of heating, holding and cooling sections were found to be 2.28, 1.0 and 2.08 m, respectively.

It is demonstrated experimentally that the birefringence of PM-PCF is decreased after processed, and the torsion sensitivity is improved in varying degrees for different lengths of heating-torsion.

The jacket runs from $180 to $250 depending on the thickness, length of heating time, and recharging options.

It was found that the length of heating section would not have an obvious effect on the stability of NCL.

Response surface methodology (RS M based on Box-Behnken design (BBD) was employed to obtain the optimal combination of moisture level (X1: 20–30%), length of heating (X2: 4–12 h), and temperature (X3 °C00–140 °C).

Researchers studying western European temperature records have found that the length of heat waves there has doubled since 1880, from 1.5 days to 3 days on average.

Reducing the width of micro-channel can reduce the length of heat exchanger and increase the height of heat exchanger.

The length of heat transfer passage also significantly affects the average value and uniformity of the external wall temperature distribution.

At the same time, the increase of the length of heat pipe radiator is favorable to the heat dissipation of radiators and the reduction in radiators weight.

And the optimized length of heat exchangers was studied, as well as method of determining the concentration of antifreeze in heat-transfer fluid in cold regions.

For the heater size effect, it is observed that by increasing the length of heat source segment, the heat transfer rate is gradually increased for both cases.