Sentence examples for length reinforcement from inspiring English sources

However, investigation of the overlapping length reinforcement is rarely discussed in the literature.

Influence of reinforcement length, reinforcement stiffness, and slope gradient on the nail forces developed following the construction is analyzed and discussed.

Structures with more complex geometries or significant external loads are practical and require consideration including, bridge abutments, superimposed walls, walls with uneven length reinforcement and back-to-back walls commonly used for embankments approaching bridges to raise elevations.

A comprehensive experimental study on the concrete steel bond behaviour of structural expanded clay lightweight aggregate concrete (LWC) was carried out using different compositions, types and initial wetting conditions of lightweight aggregates, anchorage lengths, reinforcement arrangements, strength classes and failure mechanisms.

Five beams were reinforced with insufficient bond length flexural reinforcement and were designed to be failed by de-bonding.

Current design of geosynthetic reinforced segmental retaining walls considers an a priori limitless length for reinforcement installation.

A parametric study is carried out to investigate the effect of CNT's length on reinforcement.

For this reason, ACI 408-03 (ACI Committee 408 2003) does not recommend the pull-out specimen test to determine development length of reinforcement.

The computational results indicate that increasing the sleeve length and reinforcement ratio increases the stiffness and ultimate tensile strength of demountable column-column connections.

The tests studied the influences of concrete strength, headed bar spacing, splice length, transverse reinforcement and confining shear studs on joint strength.

The solutions demonstrate that for practical scenarios, three-dimensional effects may affect the required length of reinforcement more than the associated required tensile strength.