Sentence examples for length of the specimens from inspiring English sources

The maximum length of the specimens is limited to 90 mm.

The embedment length of the specimens was found to be the factor that significantly affected the loading of the rebar.

By evaluating the test results, it was shown that the length of the specimens significantly affects the UPV values.

From the finite element analysis, it was found that the bond stress distribution depends on the embedment length of the specimens; approaching uniform distribution as the embedment length decreases.

Using conventional foaming processes, we designed, manufactured and tested two different types of bone-inspired aluminum closed cell foams, aimed at mimicking the loading adaptation feature: the first type, characterized by a directional gradient of pores (i.e. along the length of the specimens) and the second type, characterized by elongated pores by hot rolling process.

The mean length of the specimens was 21.2 mm.

An improved compliance method is employed to measure the fatigue crack length of the specimen.

This design allows blocks to freely move in the vertical direction while providing the normal support to the entire length of the specimen during the tension-compression cycle.

In case of fillet welding deformation, around 300 mm is sufficient as a critical welding length of the specimen as proposed by the existing researches.

For the TGA treatment, a new type of radiant furnace was designed to maintain a constant temperature and create a time gradient along the length of the specimen.

This design also imposes non-trivial anterior posterior shear forces, and non-uniform loading conditions were induced along the length of the specimen.