Sentence examples for length of the filter from inspiring English sources

The optimum length of the filter may not necessarily be the smallest possible, sometimes depending on diameter of the filter in equilibrium state.

From the velocity images, averaged axial and through-wall velocity, as a function of position along the length of the filter, have been obtained.

Smaller diameter of the DPF will result in larger pressure drop in the DPF and more complications for the length of the filter in equilibrium state.

The cavity length of the filter is carefully designed to make sure the longitude mode spacing is comparable to the grating bandwidth, making it single mode operating.

Images of the axial velocity were acquired at ten evenly spaced positions along the length of the filter, for three flow conditions corresponding to Reynolds number of Re = 106, 254 and 428 in the filter channels.

The proposed design approach provides the flexibility in which the TFP can be made arbitrarily close to the lowest possible lower bound of 0.25 by increasing the length of the filter.

If the chirp is sufficiently long in comparison with the length of the filters, the instantaneous frequency (IF) estimation errors are comparable to those obtained by using the static characteristic.

In order to support this, 100 Monte Carlo simulations have been performed for different lengths of the filter, and the performance is evaluated by the output SNR and speech distortion index.

The first-order derivative of the smoothed GC-skew value g i at position i is given by the following equation: Here, f i + n is the original GC-skew value in the position i + n. n l and n r represent the lengths of the filter window to the left and right of position i, and were set to 20 in this analysis.

In smoothing procedure, we need to divide the summation of projection vector data which are overlap with smoothing filter to the length of the smoothing filter, AFlen.

If a data filter has been applied to the data set in question, e.g. ignore or notice, the length of either the filtered or unfiltered x-grid may be returned by setting the 'filter' argument to True or False.