Sentence examples for length of slabs from inspiring English sources

High-resolution TEM images revealed that unsupported NiMo sulfide prepared at 375 °C shows lower number of layers in the stacks of catalyst with more curvature and shorter length of slabs compared to that prepared at 300 °C.

These parameters include the thickness and width of the guide core, mode effective refractive indices and group refractive index, diffraction order, pitch of adjacent waveguides, length difference of adjacent arrayed waveguides, focal length of slab waveguides, free spectral range (FSR), the number of input/output (I/O) channels, and that of arrayed waveguides.

Let ( l_{y} ) (the side lengths of slabs ① and ② in the direction of the Y axis) be equal to the projection lengths of the positive moment yield lines in the corresponding position, it can be noted that the load-carrying capacity of the curved boundaries in Fig. 6 and the rectangular boundaries in Fig. 14 are equivalent.

For the HDN of quinoline and the HDS of dibenzothiophene in the presence of quinoline, the high hydrogenation activity of tungsten sulfide and length of the slabs was found to be more important than in the cases with o-propylaniline.

To calculate your necessary footprint, take the total run for length of the slab, and total width of the stairs for the width of the slab.

The complex function is composed of the functions of the heat loss rate and surface temperature gradient of the slab subjected to the constraints of shell thickness, surface temperature and liquid core length of the slab.

The effect of span length of the slab on its failure probability to blast loading is also investigated.

The bending moment distribution over the length of each slab was calculated from the support reactions (measured by load cells).

Three complete and two partial wavelengths of these coupled traces are preserved along the length of the slab.

Fill the bottom of the expansion joint with dirt or sand, until the depth of the expansion joint space is the same as the length of the Slab Gasket.

The free parameters of the models are: rigidity per unit length of the beam-slab interface and the elastic modulus of the concrete slab.