Recognition was well above chance when dot spans exceeded the length of orientation-selective receptive fields [ 23].
At last, we study the nanorod length dependence of orientation anisotropy.
Based on these solutions, a parametric study of the effects of the shell length, angle of orientation of helical ribs of the lattice structure and their number on the disk displacement is performed.
Line length indicates strength of orientation.
The longitudinal length of microvoids, the orientation parameter of the carbon layer stacks and the orientation parameter of the microvoids decreased almost linearly with increasing axial compression stress of the fiber.
In addition, the density and geometry of the Sawbones, surface treatment of the cup, length and orientation of the screws, and addition of >4 screws were not assessed in this study.
Finally, the present approach is applied to investigate the effects of location, length and orientation of side cracks on the free vibration frequencies and mode shapes of simply supported and completely free square plates with side cracks, including cracks which are not along a symmetry axis, are skewed.
In each step, different parameters are investigated including length and orientation of graphene sheets, chirality, diameter, number of walls and length of nanotubes, number of nanotubes in bundles, porosity of buckypaper and alignment of bundles in a buckypaper composite.
In additional experiments, influence of adaptation length on the orientation preference of cells was determined by increasing the adapter duration from 3 to 12 min (in step of 3 min).
The goal of the calibration step is to find out a configuration of such parameters that minimizes the differences between the results gathered by the automatic procedure and those obtained with the human judgements in terms of orientation, length, and width for the considered brushstrokes.
