This study is aimed at the development of a transient hydrodynamic lubrication model for the pumps with varying length of the piston-cylinder interface and the investigation of the influences of cylinder length, clearance, as well as other design parameters, on the pump piston forces and friction.
The potential pathogenicity of glass fibers is dependent on their length, clearance, solubility, and biopersistence.
The effect of porosity, pore types, spacer length and clearance on the heat transfer performance was investigated.
Furthermore, the effects of the filter length, the clearance of TPP filters and the hydraulic diameter of CPT filters on the filtration rate and the protein rejection coefficient are also discussed.
For bridges, it lists the name, overall length and clearance below; for junctions, the distance from the starting point and the name of the road it intersects with.
Moreover, extensive parametric investigations are performed in order to achieve an optimum performance of the isolator with respect to three main properties which define the device: clearance length, the inclination angle and the friction coefficient.
In the optimum design of journal bearings, the design variables such as radial clearance, length to diameter ratio, groove geometry, oil viscosity and supply pressure are used to simultaneously minimize oil flow and power loss.
In the cases of frictionless contact of the DS with the bore hole wall, the λ values are identical for both length S at clearance values a = 0.5 m and 0.1 m, but their distinction becomes conspicuous at a = 0.05 m and a = 0.03 m.
Left-turn movement queuing section at circulatory lanes is modeled as an intersection approach with short lanes and upstream signals, where queuing diagram is employed to model the capacity, queue length, and queue clearance for left turns at the second stop line.
Four remaining series showed no association between the length of bowel clearance and anastomotic recurrence.
Main Outcome Measures: Toe clearance, preobstacle distance, postobstacle distance, step length, proportion of step length preobstacle, step time, preobstacle step time, postobstacle step time, and proportion of step time preobstacle were measured.
