Your English writing platform
Discover LudwigExact(4)
This was compared to the measured room/lamb leg temperature.
Prior to sonications, the temperature recorded from baseline PRFS measurements (n = 138) in lamb leg sample number 1 was 22.5 ± 0.5 °C (mean ± SD) compared to the measured room/lamb leg temperature on that day (21.5 °C).
No additional cooling was observed in this phase except on windier days, when leg temperature and respiration rate reductions tended to be more marked (slope estimates: −0.06 and −3.6, respectively).
However, it was recently found that the temperature of upper region of APR-1400 reactor might be little lower than or similar to hot leg temperature through the review of detailed design data.
Similar(56)
The research has been carried out to analyze the hot and cold leg temperatures, Steam Generator (SG) pressure, SG Narrow Range (NR) level, SG water-level-percentage (PCT), Pressurizer pressure, Fuel Temperature, and containment pressure.
Simulation results suggest that failure in closing PORV has negligible impact on hot and cold leg temperatures, results in an overall less pressure in SGs, but higher pressure in the pressurizer.
The sensitivity calculation investigates the mixing in reactor vessel and influence of heat structure on the hot legs temperature.
A correlation was proposed to estimate leg centre temperature from shoulder temperature.
Additionally, an area at least 10 cm above the hoof was selected to determine whether a ratio between hoof and more proximal leg surface temperature could help compensate for hoof temperature changes caused by ambient temperature changes.
Only spraying cows for ≥3 min reduced leg surface temperature during spray duration (range of reduction: −0.1 to −0.6 ± 0.0°C).
The regenerator can operate with a maximum hot leg inlet temperature of 900 °C and transfer 180 kW to the cold leg using 100 g/s helium at 4 MPa.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com