Sentence examples for least surface roughness from inspiring English sources

The Authors adopted RSM based grey relational method to achieve high productivity in terms of maximum material removal rate MRR and least surface roughness, tool wear and cutting forces.

The mechanical properties of the joints were significantly better at the least possible workpiece surface roughness.

Different OUTs, like the brick wall or the wooden panel, have a scattering pattern mainly determined by distributed surface roughness (at least in the backward half-space), and this may explain their corresponding larger k xpol values.

The low value of the sandblasted Denzir copings suggest that the machining process generated a surface roughness that was at least as rough as a machined and sandblasted Denzir surface.

It is found that successful brazing and good wetting can be achieved by the least voids by using an average surface roughness (Ra value) for the base material.

Reciprocating wear tests comparing a PVD nitrided sample, an untreated sample and different laser nitrided samples indicated that the laser nitrided sample with the lowest surface roughness exhibited the least amount of wear and had the lowest friction coefficient.

Load penetration curves (n = 1225) were determined per protein sample layer with a thickness of at least 1 μm and a mean surface roughness smaller than 2 nm for a 2.5 × 2.5 μm grid.

Experiments were performed at thin layers of each casted layer with a thickness of at least 1 μm and a mean surface roughness smaller than 2 nm for 2.5 × 2.5 μm grids (Table  1).

Nanophase materials are materials with at least one dimension <100 nm that mimic the natural surface roughness of bone.

The local root-mean-square (RMS) surface roughness was determined using height data from at least four representative 2 μm × 2 μm scan areas through roughness analysis program included in the AFM analysis software.

The local root-mean-squared (rms) surface roughness was determined using height data from at least four representative 5 μm × 5 μm scan areas through the roughness analysis program included in the AFM analysis software.