Sentence examples for layers of elements from inspiring English sources

The number of elements is about 20,000 for the artery, with four layers of elements through the radial thickness, and about 50,000 for the stent, with four layers of elements through the strut thickness and two layers of elements across the strut width.

This method provides two sets or layers of elements representing the Finite Element Model and the microstructure.

With the solid-extension mesh moving technique presented in this paper, we are also able to limit mesh distortion in thin layers of elements placed near fluid structure interfaces.

Four different meshes each consisting of 4, 6, 8, and 10 layers of elements, respectively, having 1792, 2988, 3584, and 4480 hexahedral elements were investigated.

His style is sui generis, though in its complex layering of elements, from rustic dance to dissonant pandemonium, it distantly resembles that of Charles Ives.

In the Venetian bordello sequence of Act II, Schreker achieves a layering of elements — choral serenades, barcaroles from gondolas, the strumming of a Gypsy band — that represents nothing less than an alternative vision of modernism, one that embraces the familiar instead of banishing it.

The stiffness-proportional damping described in the previous section was assigned to the following three parts of the mesh: (1) a layer of elements on either side of the fault; (2) the outermost layer of elements on the constraint boundaries; (3) the rest of the homogeneous medium.

Revetment is a protective structure for a shoreline with stony material, usually natural stone or concrete, with a thickness of only one layer of elements and of which the elements are placed in a pattern.

Conventional displacement-based methods for estimating stress intensity factors require special quarter-point finite elements in the first layer of elements around the fracture tip and substantial near-tip region mesh refinement.

The explicit marching scheme also guarantees that at most one layer of elements has to be added or deleted per time step, thereby making mesh updating simple and, thus, practical.

However, due to the simplicity of the geometry, only a thin layer of elements on the endosteal and periosteal surfaces was used in defining the boundary conditions [ 49].