Your English writing platform
Discover LudwigSuggestions(1)
Exact(11)
The thickness of the adhesive layer was fixed at 0.5 mm.
The argon gas pressure for Ni80Fe20 layer was fixed at 2 mTorr and the deposition rate was 0.12 nm s−1 fired at the DC power of 40 W.
For each measurement a pair of polymer foils with the same top layer was fixed on two sample holders (with a cross-section of 20 × 10 mm2 and gap between that is 100 956;m) [100.
For each measurement, a pair of polymer foils with the same top layer was fixed on two sample holders (with a cross section of 20 × 10 mm2 and a gap of 100 μm).
For each measurement, a pair of samples with the same top layer was fixed on two sample holders (with a cross-section of 20 × 10 mm2 and gap in between 100 μm) [15, 16].
For each measurement, a pair of polymer films with the same top layer was fixed on two sample holders (with a cross section of 20 × 10 mm2 and a gap between them of 100 μm).
Similar(49)
In the second case, the thickness of one PZT layer is fixed.
As the concentration thickness products of the n-GaAs layer and δ-doping layer are fixed, the higher δ-doping device exhibits a higher potential barrier height, a larger drain current, and a broader gate voltage swing, whereas the transconductance is somewhat lower.
The depth of this convolutional layer is fixed to 20.
Here, the thickness of p-GaN layer is fixed at 100 nm.
The velocity of the cap layer is fixed, twice as large of the layer above the cap layer.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com