Sentence examples for layer surface are from inspiring English sources

The fundamental solutions for concentrated forces acting perpendicular and parallel to the layer surface are obtained.

The RMS roughness of the approximately 5-nm-thick Ga2O3 layer surface is 2.7 nm.

An axonometric AFM image of the Au layer surface is presented in Figure 1b.

The bottom part of the pore structures with barrier layer surface is shown on the inset.

In the oxidation process, the aluminide layer surface is selectively oxidized to form an Al2O3 film.

Therefore, the ZnO seed layer surface is charged by the surface amphoteric reaction with H+ or OH− ions.

Two gold contacts, defining measured area (about 50 nm thick) on the layer surface were prepared by sputtering.

At the ignition stage, the balance of (BO)n on the liquid oxide layer surface was considered.

Moreover, the corrosion resistance of the second layer surface is close to that of wrought Inconel 625.

It is demonstrated that radial cracking from the lower core layer surface is the dominant failure mode for ceramic layer thicknesses much below 1 mm.

The GaN buffer layer surface was roughened concurrently with etching of the AlInN, although the DAE solution has no effect on as-grown GaN (0 0 0 1) surfaces.