Sentence examples for layer of filler from inspiring English sources

Three test specimens were examined: a solid foam sample, and two other foam samples incorporating an intermediate layer of filler material: SiO2 aerogel and soda-lime glass beads.

Near filler particles, the fragmented o-Ps traps convert in interfacial voids (i.e., triple junctions) representing themselves as free-volume pseudogap holes at the interface between the outer surface layer of filler particles and innermost layer of polymer [14, 15, 36].

In a vicinity of agglomerated filler particles, the fragmented o-Ps traps convert in interfacial voids (triple junctions or pseudogap holes at the interface between outer surface layer of filler particles and innermost layer of surrounding polymer matrix), which are also efficient trapping sites for positrons (corresponding to increased fraction of trapped positrons η in light-cured DRC).

Once you are ready to apply your last layer of filler, wipe it over the hole so that the filler stays level with the leather.

Match the colour of the rest of the leather then apply a leather colourant to the top layer of filler with a cotton wool bud.

(If you have only slightly cut a burn out, then apply two thin layers of filler).

Smooth a layer of body filler over the newly sanded surface.

If you're not satisfied that the surface is perfectly smooth and ready to be painted, apply another layer of body filler and sand it down again.

As for value of dielectric loss tangent, it is equal to 0.003 for epoxy layers and increases from 0.003 to 0.3 in composite layer with increase of filler content.

If you are filling a hole, you need to apply about four thin layers of heavy filler, drying each layer off with a hair drier.

Restorers removed varnish that had turned brown as well as layers of old fillers – one of which contained the pigment viridian, not available until 1859.