Sentence examples for laser tests from inspiring English sources
For the elemental analysis of the deterioration products and assessment of laser tests, Scanning Electron Microscope (Carl Zeiss Ultra Plus Field Emission) connected with an energy dispersive X-ray spectroscopy (EDS) detector (Oxford Instruments X-Max) was employed.
The results agreed with the laser tests and indicated that optimum pre-crack morphology can minimize the crack driving force at the interface.
Upon an extensive optimization and analysis on model vegetable tanned samples, Microscopic investigation of laser tests with the historical leather in the buckles showed that the soiling particles could be removed satisfactory without damaging the leather using the commonly used laser wavelength 1064 nm [35] at fluence of 2 J cm−2 using 3 scans(Fig. 6, right).
The picosecond laser tests were carried out using (see Table 1) scanning laser with fluences below previously determined damage threshold flunces and regulated between 1 and 3.18 J cm−2, with power output 100 mW; number of scans 1 10, traverse speed 300 825 mm s−1; laser spot size: 30 μm (constant); Hatch spacing: 0.03 mm (constant) and 10 kHz repetition rate.
For both CCC and Laser tests, the eyes were resting on a cantilever seat and lowered into a BSS contained in a small lab cuvette.
A decision on when or whether to put the revised Rayleigh-Taylor model for the Eagle Nebula structure to a laser test is expected before the end of the year.
"The Missile Defence Agency demonstrated the potential use of directed energy to defend against ballistic missiles when the Airborne Laser Test-bed (ALTB) successfully destroyed a boosting ballistic missile," the agency said.
The US Navy this week released footage of the laser test.
From such 3D maps, several points were chosen and the laser testing illumination was directed for these points only.
Results of a laser test on our first device and source test results on two more recent test structures will be presented.
We present the design and operation in air of a laser test-bench able to measure the laser-induced damage threshold of optical materials and components with ultrashort pulses down to nearly 10 fs pulse duration.
