Sentence examples for laser plating from inspiring English sources

Other methods include powder rolling, laser plating and forming high melting point alloy (Qaim Syed, 2011; Stolarz et al., 2015);   4.

Other methods include powder rolling, laser plating and forming high melting point alloy (Qaim Syed, 2011; Stolarz et al., 2015); Solid state targets require more manual handling which causes a higher radiation hazard for personnel, especially when the target must be retrieved shortly after irradiation.

The amount of double stranded DNA in each PCR 2 product was then measured using Quant-iT PicoGreen on a Fusion αHT Packard BioScience Company laser plate reader with the following settings: intensity = 5, time per row = 0.1, read per well = 1, high intensity (due to the expected high amounts of DNA).

Typing something with letters on opposite ends of the keyboard — like "laser" or "plate" or "mail" or a billion other words — becomes a pretty hilarious thumb stretching exercise.

The microbiopsy devices used in our studies were fabricated by laser cutting plates of stainless steel.

We recently demonstrated at imec a relatively simple process sequence for the formation of copper based front contacts consisting of: i) defining the front contact pattern by laser ablation ii) plating of the contacts using Ni/Cu/Ag in a single plating sequence and finally iii) contact sintering.

Applying Ar laser beams during plating greatly enhances the deposition rate of the films (up to ≈2 μm/min), and enables selected-area growth, or patterning, of ferrite film without using a mask.

Fiber laser bead-on-plate welding of 1.12-mm thick commercially pure zirconium (R60702) plate was studied in this paper.

The thermal conduction plate is joined to the microheat exchanger and the heat generated in the laser bar conduction plate is extracted by flowing a cooling liquid through the microheat exchanger.

Laser driven flier plates have sub-microsecond duration high-intensity shocks.

The particles were ignited using a CO2 laser heated hot plate at 670 K, whereas the pellets were ignited using an electrical spark.