Sentence examples similar to largest pit depth from inspiring English sources

A minimum of three to a maximum of six pitting depths on each steel bar were measured and their average value is reported in Fig. 9, while the minimum and maximum values of these 3 6 largest pitting depths are indicated by error bars.

Corrosion of ductile iron and carbon steel in soils is decelerated, but higher chloride concentrations induce higher corrosion rates, larger pit depths and suppress the decreasing of corrosion rates especially during the initiation.

This can be seen in the Fig. 16, where a trend is found of larger pitting depths forming when average crack spacing in the specimen is increased.

A decrease in the crack aspect ratio induces a larger effect of pit depth on (K_{text{II}}) at the deepest point and (K_{text{I}}) at the surface point.

For one case of severe corrosion, the EIFS value was much larger than the measured pit depth.

The effect of crack aspect ratio and crack depth on (K_{text{II}}) at the deepest point is both relatively small, but a decreased pit depth induces a larger effect of crack aspect ratio on (K_{text{I}}) at the surface point.

Applications to pitting corrosion of mild steel has led to new interpretations of pit data and new interpretations for the probability distributions associated with maximum probable pit depth.

G 2346 A [= G 5524 A]: Mud-brick and stone built pit, depth 3.56 meters.

The ratio of pit radius to pit depth, R/t, is proportional to the ratio of pit opening radius to pit radius, r/R.

The pit location, pit diameter and pit depth are examined to determine the influence of the pitting on the ultimate strength.

This article presents and discusses the results of 2 formulas for determining the appropriate pit depth.