Sentence examples for largest corrosion from inspiring English sources

The WC25 Cu75 coating the largest corrosion resistance was showed.

(2) Among the three solutions used in this study, the calcium acetate solution showed the largest corrosion potential area, and the corrosion potential value was located on the anode, indicating that it was not susceptible to corrosion.

However in actual corrosion conditions, severe corrosion damages with large corrosion pits exceeding 30 mm in diameter are observed in aged steel bridges.

The life expectance of some industrial evaporators is constrained by the rate of corrosion of the heated surfaces, with larger temperatures producing larger corrosion rates.

A large corrosion potential (−129 mV) and a small corrosion current density (≈2.2×10−6 A/clearlyearevealseals that the corrosion resistance of the Al0.5FeCoCrNiCu coating is superior to that of the coatings.

More cracking and higher surface roughness of the coating should be responsible for the larger corrosion current measured in the polarization curves.

For frames with larger corrosion ratio or higher axial compression ratio, damages at beam ends developed more significantly during the loading process.

The as-sprayed Ti coating presents a more negative open circuit potential and larger corrosion current than that of TA2 (pure Ti metal) owing to its porous surface structure and high surface activity compared with TA2.

The distribution of bond stress is more uniform for the specimen with a large corrosion-induced crack width.

Kansai Electric said in a statement that the pipe "showed large-scale corrosion".

As the Zr content in the alloy films becomes larger, the corrosion current density first decreases, and then increases.