Sentence examples for large feed rate from inspiring English sources

Therefore, the size effect of surface roughness can be attributed to the formation of pit defect and deep groove on the finished surface at large feed rate and the protrusion of hard inclusion from the finished surface at low feed rate.

Under the largest feeding rate (0.08 kg/s) in this study, the peak value of thermal stress is about 41 MPa.

Dynamic simulations show that rather large feed flow rate and composition disturbances can be effectively rejected.

Cryogenic distillation remains the leading N2 rejection technology for large scale (feed rates greater than 15 MMscfd) natural gas and liquefied natural gas plants.

Comparing Fig. 9 with Fig. 7, it can be concluded that, MWCNT clusters become larger with increase of feed rate.

It may increase for larger deviation of wire feed rate movement due to higher cutting speed and faster number spark generation from the new surface of the wire.

This strategy allows achieving both stoichiometric reactant feed rate and large flexibility in ester production.

Under these conditions, even while possessing relatively large individual jet feed rates, thin diameter nanofibers (200 300 nm) are readily produced.

As the cutting speed is increased from 22 m/min to 54 m/min at higher feed rate, a larger strain to an extent of up to 6.55 mm/mm, a maximum value of 810 MPa stress and higher temperature localization to an extent of 620 °C at tool tip were observed.

The results revealed that the surface roughness is strongly influenced by feed rate with a large contribution, followed by cutting depth, whereas, the cutting speed has no influence.

The significance of the dynamic heating model was observed for processes with large feed size and/or with high heating rate.