Sentence examples for laminate connections from inspiring English sources

Specimens consisting of two 76 mm × 305 mm butt ended heavy dimension lumber members with GFRP laminate connections were tested in tension to simulate the chords of the wood trusses of the historic structure.

Through analytical studies, prediction models are finally proposed for the shear resistance of TSSA and SG laminated connections.

Similarly, a comparative study of our design proposal is presented with the most recent equations for glued laminated timber connections.

A new coupled axial-shear numerical model is proposed to simulate the response of typical Cross Laminated Timber (CLT) connections under general loading conditions.

The numerical and experimental results showed that the ultimate load capacity of woven-glass vinylester laminates woven-glass vinylesterncreased by increasing ratios E/D, W/D, and M/D.

The considerations include shell geometry of the cover, structural GRP laminates with specified ply sequences, segment connections of rivet nut bolt and anchor nut types, friction at the interface between flanges and between flanges and tank walls.

Structural sections of laminated bamboo can be connected using methods common in timber engineering, however the different material properties of timber and laminated bamboo suggest that the behaviour of connections in the two materials would not be the same.

In order to confirm the safety of the root connection, the static stresses of the thick root laminate and the steel bolts were predicted by taking account of the bolt pretension and the root bending moments.

If you frequently laminate documents but don't want a hot laminator, you can buy a cold laminating machine that works with cold laminating pouches.

Mr. Kraeutler explained that earlier versions of laminate flooring were difficult to install because as each strip of flooring was laid, the tongue and groove connection required gluing and clamping of the joints.

Three examples of the use of composites, viz. in strengthening existing corrugated blast walls and their connections, in replacement of blast walls by composite sandwich panels and in the use of fibre metal laminates (FMLs), are discussed.