Sentence examples for kv potential from inspiring English sources

An AC power supply of 15 kV potential difference at 50 Hz frequency was employed to generate plasma.

The electret state was produced uniformly on one surface of the films by a corona method with a negative 15 kV potential applied to multiple pointed electrodes facing the film on a grounded plate.

Argon ion current of density more than 30 matcm2 at 4 kV potential is extracted from this ion source and is characterized by measuring the ion energy spread and brightness.

Prepared samples were run on Cu-Kα (λ = 1.5418 Å) source, 122 Phillip Diffractometer (40 kV potential difference and 25 mA current) at scan speed 1°/min, step size of 0.02° and 2θ in the range of 5° 75°.

10 18 kV DC potential (Gamma High Voltage, Ormand Beach, FL) was applied to the polymer solution while an 8 kV potential was applied to two aluminum shields placed perpendicular to the mandrel axis but parallel to the needle axis (Fig. 1A).

A 25 kV potential was applied to the needle tip using an ES30 power supply (Gamma High Voltage Research, Ormond Beach, FL).

The results showed that by applying a (−8 kV) voltage potential across the storage module, the time required to melt 7 mm thickness of the PCM can be reduced by 40% when compared to 0 kV case.

The standard approach for the fabrication of surface plasmon polaritonic crystals (SPPC) relies on removing selected regions of Au using ions accelerated through a 30-kV potential.

A positive 7.5-kV electrostatic potential was applied to both needles for the two blended solutions and a 9-kV potential for the pure PCL solution.

The following experimental parameters were used: capillary voltage 1.3 kV, declustering potential 100 V, focusing potential 150 V, second declustering potential 15 V, and focusing rod offset varied from 80 to 100 V, MCP 2,550.

Electrospray-charged particles can be accelerated to hypervelocity speeds, even with a modest 100 kV accelertion potential.