Sentence examples for kv operating from inspiring English sources

Transmission electron microscopy (TEM) studies were carried out on a probe corrected Titan G2 80–200 kV operating at 200 kV.

Energy dispersive X-ray (EDX) analysis was done on the EDAX system (Zeiss X-flash detector analyzer, associated with SEM equipment) using incident electron beam energies of 20 kV, operating at WD 9.0 mm for the determination of the chemical composition of the deposited ITO films.

Experimental measurements prove that the IC can sustain automotive applications with ESD protection of 4 kV, operating temperature range from −40 to 150 °C, and up to 180 °C absolute value (the IC is not working properly but is not subject to damage), absolute voltage rating from −0.3 to 70 V.

At one point, a KV operating partner even served as the interim CEO.

Measurements were made with Mo/Mo, 28 kV operating voltage, and 2 mm Al at tube exit.

We describe a new post-column imaging energy filter for (scanning) transmission electron microscopy from 60 to 300 kV operating voltage.

Transmission electron microscopy (TEM) selected area electron diffraction (SAED) images were taken on Zeiss-EM10C 80 Zeiss-EM10C 80 accelerating voltages of 40 and 200 kV.

All spots were measured in MS mode; up to 10 of the strongest precursors were selected for MS/MS analysis, which was performed using collision energy of 1 kV and operating pressure of the collision cell of 10−6 Torr.

Scanning Electron Microscopy (SEM, JEOL JSPM-5200) with energy dispersive X-ray analysis (EDX) was used to examine the as-prepared Cu-dotted oxide coating at a 15 kV voltage operating condition.

After that, scanning electron microscopy (SEM) studies were performed with Hitachi S3400N (Chiyoda-ku, Japan) at 7-kV operating voltage in secondary electron mode.

Serial images were collected using a Tecnai Spirit (FEI Company) 120 kV transmission electron microscope operating at 80 kV, with an Eagle 4k × 4k CCD camera.