Sentence examples for kerosene flow from inspiring English sources

The kerosene flow in the reactor is not a smooth flow or a complete mixing flow judging from the dimensionless variance.

The optimum spray parameters (OSP) were 963 L/min for the oxygen flow, 28 L/h for the kerosene flow, and 330 mm for the spray distance.

It was concluded that the kerosene flow had greater influence on the Rc of the coating and followed by the spray distance and the oxygen flow, respectively.

Results show that isobutane, of the pure fluids, yields the best plant efficiency of 6.8% with approximately half of the kerosene flow available, and the efficiency can be increased up to 7.6% using the butane/pentane mixture.

The effect of selected parameters (oxygen flow, kerosene flow and spray distance) on the cavitation erosion resistance (denoted as Rc) of the coating were investigated by using the Taguchi method.

Predictions of the relative phase of the vibration at two points are compared with measurements carried out on the "Micro Motion" industrial meter in water and kerosene flow rigs.

The holdup data were obtained using an air-kerosene mixture flowed through a test section consisting of a horizontal pipe 2-in (50.8 mm) in diameter and 118 ft (36 m) long.

The porosity and amorphous fraction of the coatings decrease as the kerosene and oxygen flow increase within the parameter range examined.

Coatings are made up of highly flattened splats, whose diameter varies reflecting the size distribution of the feedstock powder, and <2% porosity is obtained when the torch is operated using adequate kerosene and oxygen flow rates and low standoff distances.

These calculations are beneficial to better understand the underlying atomization mechanism in the cold kerosene-fueled supersonic flow and hence provide insights into scramjet design improvement.

The incident shock wave generally has a strong effect on the transversal injection field in cold kerosene-fueled supersonic flow, possibly due to its affecting the interaction between incoming flow and fuel through various operation conditions.