Your English writing platform
Discover LudwigSuggestions(1)
Exact(4)
Combining these two methods can keep the inlet temperature of the platen superheater less than 400 °C.
Two 1-kW heaters were located in the reservoir to increase the fluid temperature and to keep the inlet fluid temperature to the test section constant.
Furthermore, TES can be controlled to keep the inlet air temperature of all compression stages the same value except the ( 1^{text{st}} ) one in practical engineering and the corresponding temperature is denoted by ( T_{text{cin}} ) in this paper.
For methanation reaction, the basic requirements for the catalyst are that it must maintain the activity at the temperatures during the normal operation, meanwhile, it should be able to start up the reaction at the possible lowest temperature so as to keep the inlet temperature as low as possible.
Similar(54)
But even through the mist, from this vantage point, they could see what kept the inlet dry — a natural dam of boulders.
For this reason, it is highly desirable to keep the compressor inlet air temperature as low as possible by cooling the incoming ambient air.
In order to avoid hysteresis phenomenon and keep the hypersonic inlet operating in a started mode, the control route should never pass through the local unstarted boundary.
To keep the coolant temperature at the inlet of the core constant, a control strategy based on a simultaneous feed-forward and feedback scheme has been adopted.
By using an auxiliary compressor and a bleed valve, a variable mass flow rate can be obtained so to keep the temperature at turbine inlet constant.
A modified sliding pressure regulation method, which regulates the turbine inlet pressure to keep the temperature difference between heat source temperature and turbine inlet temperature constant, is applied to control the cycle when off-design conditions occur.
To keep the temperature of coolant at inlet of HXs constant, a control strategy based on a simultaneous feed-forward and feedback scheme has been adopted.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com