Sentence examples for joint fracture from inspiring English sources

A global energy criterion for the joint fracture is proposed.

Open image in new window Fig. 6 Hybrid modelling of rock joint fracture process during shearing.

(3) Roughness affects the joint shear resistance evolution through influencing the joint fracture micro-mechanism.

Creep/fatigue and shear overload microscopic failure modes were found on the solder joint fracture surfaces.

When the adherends underwent the elastic deformation, adherend stiffness affected the joint stiffness and joint fracture process.

Moreover, it is found that the joint roughness affects the joint shear resistance evolution through influencing the joint fracture micro mechanism.

The joint fractures in the coarse blocky Mg2Sn intermetallic phases in the center of the brazing zone.

One of the lower bars of the south beam next to the middle joint fractured at a displacement of 276 mm, corresponding to a load of 53 kN.

The increased strength is due to the intermetallic layer being formed at the region with low stress, so the joint fractures in an Al-rich dendritic region.

The morphologies of the welded joint fractures and the fracture modes were observed with SEM (scanning electron microscope), and the fracture chemical compositions were analyzed with EDS (energy dispersive spectrometer), respectively.

However, a number of outstanding issues of importance relating to rock joint fracturing still remain (Barton 2013), such as asperity degradation and breakage induced gouge production and grinding (Jing and Stephansson 2007).