Sentence examples for jets conditions from inspiring English sources

Results show that for two models in the absence of cooling water, the bottomhole center temperature and pressure are higher than the two sides under multiple hydrothermal jets conditions.

The results indicate that the bottomhole central temperature and pressure are higher than the two sides under multiple hydrothermal jets conditions, which is similar to the flow pattern with a single jet.

Under co-flow jets conditions, except for the case L = 75 mm, as the jet spacing increases, the oxidizer flow could be internally diluted to a lower concentration and preheated to a higher temperature, at least 1200 K.

The results show that the ignition temperature is 517 °C for Datong bituminous coal with an averaged particle size of 60 um; the ignition delay is approximately 10 15 ms under co-flow jets conditions and only 4 ms under coaxial jets condition.

Safety distances were evaluated and an extrapolation model to other jet conditions was proposed.

Three different jet conditions are simulated, over a range of Reynolds number between 7,000 and 19,500.

According to the investigation of various conditions of jets, important phenomena of flow field and some effective jet conditions are found.

In addition, a setup for high-resolution RIS in a gas-jet was designed using numerical simulations of the gas-jet conditions based on computational fluid dynamics.

The 'source alteration' effects and the "flow-acoustic interaction" effects are isolated as far as possible for all jet conditions.

Four flow conditions were investigated with the intent of providing model validation data; close and far sprinkler spacing, each with quiescent air and strong jet conditions.

In this study, the characteristics of the various jet conditions of a counterflowing jet on a cone surface were investigated numerically to improve performance of the jet on heat reduction at the surface of a nose.