Sentence examples for isothermal test from inspiring English sources

In case of isothermal test, the isothermal degradation was investigated at 90, 110, 130, and 150 °C for 100 min.

The material parameters of viscoplastic constitutive models are often determined from isothermal test data at different temperatures.

The specimens were heated to the desired temperature before they were subjected to an increasing point load up to failure (isothermal test).

The CMAS corrosion resistance of as-sprayed TBC and treated TBC was compared after isothermal test of 1200 °C for 24 h.

For each NiTi polycrystalline strip in this study, a strain-controlled isothermal test was firstly conducted to check the pseudoelastic properties and then a stress-controlled fatigue test was performed with synchronized optical observation on the evolution (cyclic nucleation/annihilation) of Lüders bands in the strip.

Each isothermal test lasted for 1, 5 and 24 h, or in some cases 46 h.

The temperature of TGA isothermal tests was taken above the ignition temperature (onset) determined by the TGA dynamic scan.

The catalyst was tested both in temperature-programmed experiments (light-off curves) and in isothermal tests.

The low-cost device also makes isothermal testing possible at strain rates higher than corresponding tests in air.

Fully reversed isothermal tests were performed under strain control at temperatures of 25, 550 and 850 °C.

Additionally, the LTO region of both light and heavy oils held three subzones in the aspect of isothermal tests.