It is shown that displacements of piles can be effectively predicted by using the probabilistic model, and such prediction can be made for a pile design where a load test is not performed.
Lastly, the static shear strengths of reinforced steel-fiber-reinforced concrete beams were effectively predicted based on Aoude's model, and the effectiveness of using steel fibers was greatest under the static loading condition, as compared with impact and blast loading conditions.
However, the mixture toxicities were effectively predicted by the integrated CA with IA based on multiple linear regression model (ICIM).
Fretting fatigue strength can be effectively predicted regardless of pad geometry, rigidity, contact pressure and slip amplitude based on the tangential stress range compressive stress range diagram.
The comparison among the experimental and the calculation results show that the life increment caused by the stop-holes can be effectively predicted in this way.
It is seen that the friction-induced limit cycles can be effectively predicted, removed, and quenched via the design of the compensator even in the case of viscous gain and delay time variations unconditionally.
Taking these cigarette design features into account and adding a limited amount of quantitative mainstream smoke composition information, it is shown that, within the boundaries of the considered cigarette design parameters, the in vitro toxicological response can be effectively predicted.
The experimental results demonstrate that the positioning errors of robot manipulators can be effectively predicted using some constant coefficient polynomials whose coefficients are determined by employing the PSO algorithm.
It is shown that the behaviour of thermo-mechanical fatigue can be effectively predicted at the microstructural level and this can lead to a more accurate assessment procedure for power plant components.
Conclusion: Overall, our results confirm that early death directly attributable to septic shock could be effectively predicted by the CDV in the first hours of treatment.
