Sentence examples for into heaters from inspiring English sources

Founded in 1902 in Treviso as a provider of spare heating parts to local businesses, De'Longhi evolved into heaters and air conditioners, then into home appliances, finally deciding to focus on coffee makers in 1990.

These countries will soon be buried in e-waste and informal recycling techniques, including dropping PCBs into heaters to release the gold and other rare metals, create massive problems for the recyclers and nearby homes.

A typical reaction process is as follows: 25 mL of a mixture of CoCl2and SmMl3(28.5 mM CoCl2, 5.7 mM SmCl3in tetrahydrofuran, THF) is delivered into a heater (H1) by a pump (P1), the mixture entering into the inlet 1 after it is heated to 50 °C.

After washing with ethanol, the precipitated white powder was taken into a heater maintained at about 60°C to dry it and to make it into a fine powder.

A contractor was hired to build a secondary unit to house the wood chip hopper, where the chips are fed into the heater unit.

A ceramic piece is inserted into the heater compartment of a pressure vessel, which is evacuated of air by means of a vacuum pump.

"When you get these variable rates," said Kevin Nolan, a vice president of technology at G.E. in Louisville, Ky., "we will have a low-cost communications module that will hook into the heater and communicate with whatever smart meter you have in your home".

Each sample to be measured is dropped into Mo-heater by manipulating the Ni-piece with a small magnet.

The recovered samples were quickly covered by epoxy and placed into a heater under vacuum to solidify the epoxy.

After washing again with ethanol, the precipitate was taken into a heater which was maintained at about 60°C in air, and then finally, a white fine powder was obtained.

A volume of 25 mL of the reducing agent, which is a mixture of 90 mM LiBEt3H and 0.24 mM PVP in TH; PVP: Mw = 29,000, is delivered into a heater (H2) by a pump (P2), and heated to 52 °C before it is pumped into inlet 2. At the Y mixer 1, the salt mixture from inlet 1 mixes with the reducing agent, and the metal salts are rapidly reduced to metal atoms.