Sentence examples for internal toughness from inspiring English sources

Ochoa speaks softly, but there is an internal toughness that has helped make her so successful.

If there is a hardening layer on the surface of the rollers and if the load is insufficient to generate severe flaking during the subsequent operation, the material, which has internal toughness and an induced external hardness, can experience reduced wear and fatigue damage and convey an extended service life for rollers composed of it.

The counteracting effects of internal stress and interface toughness may explain this behaviour.

Some bulk metallic glasses can have tensile strength up to 3000 MPa with good corrosion resistance, reasonable toughness, low internal friction and good processability.

The good balance between hardness and toughness, low internal stress, superior low-friction and anti-wear properties of duplex doped nc-WC/a-C(Al) nanocomposite coating make it a good candidate as solid lubricating coating in engineering applications.

Such multilayered film configuration enables optimisation of the film/substrate as well as the film/worked material interactions, by controlling the internal stress state, fatigue toughness, hardness and superficial composition of these Ti(CxN1−x) coatings.

He has shown his teammates, though, that his toughness is more internal.

For the microstructures with different volume fraction of lamellar grains, the fracture toughness increases with the internal stresses, which facilitate the formation of shear ligaments; and the effects of the α2 phase and equiaxed gamma grains on the internal stresses and the fracture toughness were discussed.

OLYMPUS TOUGH TG-810 Toughness.

Polypropylene was blended with polybutadiene in an internal mixer in order to improve its toughness.

The purpose of this research was to develop a new energy-based method to measure the fracture toughness of hard coatings using internal energy induced cracking (IEIC).