Sentence examples for intermediate coat from inspiring English sources

The coating system comprises the primer, intermediate coat, and top coat.

Frequently mentioned coatings for steel beam treatments include: polysiloxane systems which comprise of a zinc based primer and an epoxy siloxane top-coat, and inorganic zinc primer with an epoxy intermediate coat and a urethane top-coating.

However due to variability amongst individuals, it is difficult to classify with certainty few animals having an intermediate coat.

Consistent with this, their coat coloration was normal for mongoose lemurs and so they could not be F1s, and are unlikely to be F2s, since the confirmed offspring of an F1 hybrid and a mongoose lemur (JP152) has intermediate coat colour.

There are many different combinations of primers, intermediate coats, and topcoats that can be applied to steel beam ends to protect the infrastructure components from corrosion.

With the pretreatment, an intermediate coating was prepared with a coarse and porous structure, high cohesive strength and high heat resistance.

An analytical study of the contact stress distribution under a spherical indenter was performed, considering changes in stress distribution after adoption of the WC-Co intermediate coating as a load support layer.

A transition in the voltage-time response, accompanied by a change in the acoustic and optical emission characteristics of discharges, was associated with the development of an intermediate coating layer with an average hardness of 270 450 HV0.05.

Surprisingly, four unmated queens from three queenless colonies, i.e., colonies without mated females, showed an intermediate wax coat: they presented a smaller amount of this compared to mated-fertile queens but such wax coat was sufficient to render them less shiny that typical gynes.

The bladder is a hollow organ of variable capacity, with a powerful intermediate muscle coat that empties the organ when it contracts, and two muscular sphincters that keep the exit closed at all other times.

To help protect against high temperature oxidation of such components, an intermediate bond coat is applied, typically of an MCrAlY-type metal alloy.