Sentence examples for interior tubes from inspiring English sources

What's more, upon high temperature annealing, the encapsulated ferrocene molecules will decompose and change into interior tubes, forming double-walled carbon nanotubes (DWNTs).

Many photographed the portable heating units scattered about the village: skinny, flat-topped metal pyramids with flames coursing through an interior tube.

The next step in concrete high-rise construction was the combination of the perimeter-framed tube with a largely solid-walled interior tube or shear walls to give further lateral stability.

Cooking technology of the 1980s made doing this indoors seem utterly possible — intelligent, even: the billowing clouds of black smoke were theoretically vented to the outdoors, while the drippings from whatever you grilled drained into an interior tube that wended its way toward a pan that could later be emptied and scrubbed.

In this study, a measuring device (flux-tube) and a numerical method for determining the heat flux in boiler furnaces, based on experimentally acquired interior tube temperatures, are presented.

This large difference was attributed to the heat transfer resistance between the interior tube wall and the fluid: gas permeating across the membrane tube may have created a boundary layer thus limiting the mixing between the two fluids.

A coaxial loop (a 40 mm OD coaxial tube with a 20 mm OD interior pipe) and a U-tube (20 mm OD pipes) of a length of 72 m were constructed, tested and analysed in terms of ground heat extraction capability and hydraulic flow characteristics.

The komatiites are inferred to have flowed in a laminar state, through the development of interior magma tubes beneath surface crusts, and to have grown endogenously.

The most common mechanical processes include water/steam/sand blasting for large exposed surfaces (blasting being the process of forcibly propelling a stream of material against a surface under high pressure) and abrasive pads for smaller, more difficult to reach surfaces such as the interior of tubes.

The diameter of the nanotubes is increased towards the bottom of the tube, and the interior of the tube is empty.

This is most likely due to the elimination of some retained Fe particles at tube ends by the HNO3 solution, thereby facilitating the N2 access to the interior of the tubes.