Sentence examples for interference of flow from inspiring English sources

Further, it is hypothesized that cross-, or X-shaped, piling may provide improved restraint on lateral flow deformations due the destructive interference of flow imposed by their cross-section.

Since the interference of flow f2 caused the loss of about the 50% of the packets, the LSR of the degraded link fell very fast under the threshold (in this case, we defined a fixed threshold of 90%).

The delay bound assesses the contribution to the delay due to the interference of other flows precisely, and to the best of our knowledge, it is better than any other applicable result available from the literature.

Polymer solution is then charged via the metallic needle tip with a high voltage supply (603C-300P, Spellman High Voltage Electronic Co .. Electrospinning is performed inside a custom fabricated acrylic box for controlled humidity and minimal interference of air-flow from the environment.

CFD can be used to assess the effect of flow interference on the fluid distribution and pressure loss of single- and multi-phase flow over the heat exchanger.

A systematic classification of flow interference regimes is linked to the observed vortex shedding responses for a wide range of arrangements.

As soon as the dead animal drops to the ground, eliminating the interference, the flow of electricity should resume.

This implies that by considering partial interference, more combinations of flows on the links can be admitted, and the capacity of a wireless network can be potentially increased.

The coordinated interference constraint thus ensures that sum of flow demands of all coordinated links must be less than or equal to the available effective capacity of link e j.

We demonstrated how to use the formulation to find the optimal placement of surface gateways with respect to a variety of optimization goals and a set of flow conservation constraints, interference constraints, and deployment constraints.

In this investigation, it can be explained that in higher velocities of flow probably through interference, the high shear stress causes separation and dislodgement of the inhibitor layers or adsorbed [Fe2+-Inh] complex from the metal surface and can result to the decrease in the value of the inhibition efficiency with the increase in the electrode rotating speeds (Jiang et al. 2005).