Sentence examples for interconnected sheets from inspiring English sources

At last, a different method of generation of multiple interconnected sheets is demonstrated through the distortion of a sheet by the impact of a liquid jet.

The activated surface would promote the nucleation and growth of the nanostructures, and these nanostructures would form interconnected sheets and aggregate with an excessive amount of NH4F as shown in Figure 1c.

The nitrogen-doped pomelo mesocarps-based nanosheet carbon (N-PMNC) displays an interconnected sheet-like morphology, a high specific surface area (974.6 m2 g−1), a porous architecture and a high nitrogen doping content (9.12 wt%).

The improved Li storage properties could be ascribed to the interconnected sheet-like micro/nano-architecture with rich spaces, as well as the relatively stable geometrical characteristic, rare cracks and reduced resistance after cycles.

Due to the varying effect of different activating agents, the interconnected sheet-like carbon with a high surface area of up to 2285 m2 g−1 and a thickness down to ∼4 nm can be obtained.

The as-prepared carbon materials were fully characterized to determine their morphology and structure features, and it was found that the obtained NPCN has a unique interconnected sheet-like morphology and a hierarchically porous structure with a relatively high specific surface area of 1540 m2 g−1 and a large pore volume of 1.85 cm3 g−1.85

Over the Stock Exchange floor, Pflueger mounted a ceiling composed of interconnected sheet metal strips above which he used indirect lighting to soften the edges and reduce shadows made by traders on the floor below.

Healthy adult RPE cells form a tightly interconnected sheet of cells positioned between the photoreceptors and a rich vascular layer, the choroid (or choriocapillaris).

In the composite, interconnected graphene sheets with few structural defects constitute a high-efficient conductive network to improve the electrical conductivity of polyaniline.

Adapted from reference [147] Open image in new window Fig. 15 a Photograph and b scanning electron micrograph of the microporous graphene foam structure showing a continuous network of 3D interconnected graphene sheets that comprise the walls of the foam-like structure.

Such an enhanced high-rate dischargeability performance is caused by (1) high specific surface area of RGO to increase active sites; (2) high conductivity of RGO to accelerate the charge transfer rate; and (3) unique interconnected RGO sheets among HSAs to reduce the internal resistance.