Sentence examples for interaction losses from inspiring English sources

In the De Vijvers building (containing a lot of concrete walls), the interaction losses can be quite high (up to 17.2 dB for P T4 V ).

However, their approach assumes that interaction losses occur immediately after duplication and does not support interaction gain outside of gene duplication.

Only the interaction loss model has been adapted, based on one trajectory (T5).

Interaction loss is also used in the IDP model in [10].

Each time the room with the access point is reached, the total loss is calculated (distance loss + cumulated wall loss + interaction loss).

The path loss model, based on the three discussed contributions (distance loss, cumulated wall loss, interaction loss), will now be discussed.

In that case, the interaction loss function could be determined by executing a limited path loss measurement in two perpendicular corridors.

The wall penetration losses have been determined from measurements and literature [28] and interaction loss has been fitted to match these measurements.

Values for the model parameters will be determined in Section 7. Typical contributions of the distance loss, cumulated wall loss, and interactions loss for different transmitter-receiver configurations will be presented in Section 3. The dominant path is defined as the path for which the sum of the cumulated wall loss, the distance loss, and the interaction loss is the lowest.

Figure 6 shows the obtained relationship between the angle of the bend made by the propagation path and the corresponding interaction loss of Equation (2) for layered drywalls.

Because the interaction loss should be the same for e.g., three changes of 30° and one change of 90°, a linear relationship is proposed.