Sentence examples for intensity of the flow from inspiring English sources

What has changed is the greater intensity of the flow of information between the American and Mexican military and intelligence services, officials said.

The problem is characterized by two parameters, the intensity of the flow u0 and the spatial scale ϵ.

The decay curves of the turbulence intensity in the streamwise direction showed an attenuation of turbulence intensity of the flow induced by the particles for both grids, while the presence of particles decreased the energy spectra at high frequencies.

The pattern and intensity of the flow and crystal sedimentation are dependent on the crystal morphologies (columnar or equiaxed); hence, the potential error of the calculated macrosegregation caused by the assumed growth kinetics depends on the crystal morphology.

It is believed that the local topology has a significant effect on the wind flow pattern, wind velocity and turbulence intensity of the flow above the roof of buildings and thus is significantly influencing wind harvesting potential.

And finally, the longitudinal average velocity decrease along the jet axis is quicker in the nonreacting jet, and nondimensional transverse velocity fluctuations are about half as high in the reacting jet as in the nonreacting jet, indicating a reduction of the turbulence intensity of the flow in this direction in the jet flame.

The intensity of the current flowing through the electrode was, therefore, used to define a spray nozzle performance index.

Calculation of the B of each conductor is based on the application of the Biot-Savart formula and therefore, resulting directly proportional to the intensity of the current flowing in the conductor and inversely proportional to the distance between the conductor and the point where the field is computed.

Passenger flows require the provision of levels of equipment that match the intensity of the flows, from a simple post, a shelter or a single building, to a complex of buildings for a large station.

The intensity of this flow depended upon the wave steepness and the crest depth to wave height ratio.

The heat transfer rate increases when increasing the depth of the semicircle groove on the tube wall due to the intensity of the swirling flow, especially, secondary swirling flow.