Sentence examples for intake air flow from inspiring English sources

The IAT sensor is a thermistor that is installed in the PME intake air flow path.

Intake air flow rate, LAMEE-to-total length ratio and working-to-intake air flow ratio are regarded as design variables.

Within such a design, the exhaust heat can be recovered to the intake air flow between the compression chamber and combustion chamber.

Cold water of the unit finishes heat-exchanging with intake air flow passing air cooler, and the cooled air flows is conveyed by fans to working face through wind tunnel for working face cooling.

The performance was investigated by varying five key parameters: solution self-cycle ratio (Rs), working to intake air flow ratio (Ra), regeneration temperature, ambient air temperature and humidity ratio.

Simulation results showed that the outlet temperature of the product air was affected by the working-to-intake air flow rate ratio and the dimensionless channel length, while the outlet humidity ratio of the product air was influenced by the length of the liquid desiccant film and the dimensionless channel length.

With an intake air of 30 °C temperature and 50% relative humidity and a working-to-intake air flow ratio of 0.33, the system attained a wet bulb effectiveness of 112% and a dew point effectiveness of 78% with 5 mm channel height and 500 mm channel length.

The model is also used to study how design parameters, such as position of intake air trenches and flow rate of fresh air, will affect energy savings.

The test bench monitoring system is essential to control engine various necessary parameters such as cooling temperature, oil pressure and temperature, fuel supply, intake air and exhaust flow characteristics.

The design also calls for a system to redirect air flow to intake engines and to control laminar flow – in other words, to reduce turbulence around the plane and reduce drag.

Modelling results indicated that respirable dust particles could be significantly diluted at the operators' breathing level by increasing the ventilation volume from the horizontal air intake, where 10 13 m3/s of air flow rate was suggested to be a preferable quantity.