Sentence examples for insulated contact from inspiring English sources

In the polyol synthesis of Ag NWs, PVP, as the surfactant, adsorbs on the surface of Ag NWs, resulting in insulated contact between the wires in the random network [59, 60].

Further tests in an insulated millisecond contact time reactor demonstrated that the catalytic combustion reactions could be exploited to ignite the gas-phase reactions; comparison with the simulations of a purely homogeneous adiabatic reactor showed that at the highest temperatures the observed ethylene yields were close to the maximum obtainable values.

Install the circuit breaker into the panel by first hooking or clipping to the grounded or insulated slot or rail (manufacturer dependent) on the outboard side of the insulated electrical contacts, then line up the clip or slot of the circuit breaker with the electrical contact rail or bus.

The proposed technique consists of only four insulated conducting electrodes in contact with the flowing liquid along with an electro-optic system for signal conditioning and transmission of the measured signal to a remote location.

That ultimately led to a greater likelihood of contact between insulated elements, be it through manufacturing defects, dropping or other factors.

Periodic surface metal p-contacts with insulated grooves realize gain-coupled mechanism.

Electrically insulated point or stripe contacts to the solar cell absorber are embedded within a planar hydrogenated amorphous silicon emitter layer deposited at low temperature on the rear side.

Nevertheless, our observations of ILI age dynamics in this early warning period (around weeks 49 52) lead us to hypothesize that the predictable age dynamic shifts in the abutting Thanksgiving and winter holidays, which may be due to reduced contact rates, create an insulated 'severity testbed' for improved signal detection during these weeks.

In gas-insulated systems, the presence of solid insulators used to hold conductors at high voltage induces the presence of triple interfaces where the metal, solid insulator and gas are in contact.

The reliability of press-packed insulated gate bipolar transistors (IGBTs) depends on satisfactory contact conditions applied at assembly stage and maintained throughout the service life.

Even the insulated hood is a nice touch.