Sentence examples for instrument interface from inspiring English sources
Asurvey into the attitudes of anaesthetists to features in monitoringinstruments, particularly the design of alarms, visual warnings, alarmlimits and the general instrument interface is reported.
Design consideration for instrument interface, anticipated difficulties with speciation experiments and applications for specific matrices and analytes are also presented in this article.
To remove the metal counter-ions and improve the signal levels when ionizing in the negative nanoelectrospray mode, vapors of weak acids such as acetic acid and formic acid can be mixed with the curtain gas and introduced in front of the instrument interface.
The mass spectrometer's source voltage for this application was set at 3.5 kV with scan time duration of 1 s/scan and spectra were acquired using both survey and parent scan MS methods with data dependent acquisition (DDA) setting defined by MassLynx software instrument interface.
The relevance of such an approach is partly in enhancing our understanding of instrument interfaces and human machine interaction in complex work domains and partly to support the design and development of flexible and tailorable instrument interfaces.
Described here is a PHIP instrument interfaced to a portable NMR console operating with a static field electromagnet in the milliTesla regime.
This paper will briefly present a semiotic approach to instrument interfaces based on a conceptual analysis of display and control components and their compositional semantics.
instrument interfaced with a QP 5000 mass selective detector operated in scanning mode (m/z 40 400).
were obtained using an Agilent 5975B instrument interfaced to a 7890 GC equipped as above, except that the analytical column used was a 30 m × 0.25 mm DB1MS (i.d., 0.25 µm coating thickness).
For these studies, we used an Agilent 5975B instrument interfaced to a 7890 GC equipped as above except that the analytical column used was a 30 m × 0.25 mm (i.d., 0.25 µm coating thickness) DB1MS®.
Electrochemical measurements were performed using a potentiostat/galvanostat test instrument (Gamry Instruments, Interface 1000E) with an open two-electrode cell configuration at 298, 313 and 333 K.
