Sentence examples for installation tolerance from inspiring English sources

In current construction practice, vertical slotted holes are widely used in the lapped joints of cold-formed steel (CFS) Z-shaped purlins to simplify the erection of multi-span purlin systems by providing extra installation tolerance.

In the prismatic VHTR core with hexagonal graphite blocks, the bypass gap, which is an interstitial gap between the hexagonal blocks, inevitably forms due to the installation tolerance and irradiation shrinkage of the core blocks.

The large size and mass of components with tight installation tolerances results in complicated assembly procedure.

Short and flexible pipe sections are assembled in a variety of spatial configurations to accommodate fabrication and installation tolerances (design for installation) and to withstand the end loads and displacements caused by flow/temperature and pressure fluctuations, as well as riser base oscillations (design for operation).

The error fields are originated not only by coils fabrication and installation alignment tolerances, joints and busbars but also due to the presence of ferromagnetic elements.

The drainage and the asphalt-and-gravel subsurface preparation of the track cost $2 million; its high-tolerance installation, verified by on-site measurement, does not deviate from level more than an eighth of an inch over 10 feet of track.

Inadequate tolerance for installation of the grouted splice connection during erection of the precast wall panels.

However, it is noted that a smaller sleeve diameter might lead to the following problems: a. Inadequate tolerance for installation of the grouted splice connection during erection of the precast wall panels.

The present paper addresses the impact of the fabrication tolerances and installation misalignments of the magnet system; the impact of ferromagnetic inserts and busbars as well as the design of the correction coils will be thoroughly covered elsewhere (Amoskov et al., in press [1]).

On Friday, "Ship of Tolerance," the latest Conceptual installation from the Russian ?gr?rtists Ilya and Emilia Kabakov, makes its North American debut at the Miami Children's Museum.

"It's doable," said Lou Cerny of MTH Industries, who managed the installation at the Sears Tower, where the tolerances were one-sixteenth of an inch.