Sentence examples for insert with different from inspiring English sources

Fig. 2 SEM images of nanoporous silicon (cross section in insert) with different processing time.

Cutting inserts with different cutting edge radii tested in industrial conditions were examined.

Cutting inserts with different cutting edge radii and at various feedrates were examined.

Pipe inserts with different node installation are carefully investigated at the Reynolds number range of 2892 28,915.

Heat-treated coated cutting inserts with different film thickness, annealed for various annealing times revealed considerable internal stress modifications.

Longitude turning operation test using ductile cast iron (AISI 100-70-03) was also performed on TiCxN1 − x (10 μm)/Al2O3 (5 μm -coated carbide inserts with different x values (x = 0.59–0.74).

Wear behavior of CVD TiCN/Al2O3/TiN and PVD TiAlN/Al2O3/ZrN multilayer coatings was compared on the milling inserts with different designs (various chip breaker groove angles).

Wire-net cylinder inserts with different spacer length (S/D = 2.1, S/D = 4.2, S/D = 8.3) and different open area rate (OAR = 0.33, 0.5 and 0.67) were investigated at the Reynolds number range of 290 2024.

In the current design the reactor consists of a pipe with an inner diameter of 7 mm and metal foam inserts with different pore sizes of 20, 30 and 45 ppi.

The performance of pediatric PET inserts with different axial lengths (between 6.8 cm and 102 cm) is assessed following the NEMA NU2-2012 protocol.

Fig. 2 Quantification errors for phantom inserts with different shapes and volumes scanned in air (a), and error distribution for both scatter correction methods, TEW and APDI (b).